← Hangar

Antigravity · 360° immersive

A1

DE001 (8K 360°)

Partly verified

The airframe values come from the manufacturer spec sheet. That sheet publishes no camera section, so the camera values come from a secondary source and are flagged for instructor verification. The 'Antigravity 360 drone' named in the course brief was matched to the A1 (model DE001); confirm the classroom unit's model.

Aircraft

Takeoff weight
249 g
Max takeoff weight
not published
Max flight time
22 min
Max hover time
not published
Max wind resistance
10.7 m/s
Max speed
16 m/s
Ingress protection
not published
Gimbal
No mechanical gimbal: two opposed lenses capture the full sphere and direction/horizon are chosen in software (reframing).

249 g with the standard battery (22 min, hover test at 5.2K/30 without recording); 291 g with the High-Capacity battery (approx. 35 min). Max speed 16 m/s is S Mode (12 m/s N, 3 m/s C).

Camera payload

Dual-lens 360° camera

Secondary source
Sensor
2 × 1/1.28"
Resolution
55 MP · 10496×5248
Focal length (35 mm eq.)
not published
Aperture
not published
Field of view
360° diagonal
Focus
Fixed
ISO (photo)
not published
Shutter (photo)
not published
Photo formats
not published
Video
7680×3840 (8K) at 30 fps; 5248×2624 at 60 fps; 3840×1920 at 100 fps
  • 🔒 Antigravity does not publish the aperture for this camera, so Shutterstanding will not simulate it.
  • 🔒 Antigravity does not publish the shutter-speed range for this camera, so Shutterstanding will not simulate it.
  • 🔒 Antigravity does not publish the ISO range for this camera, so Shutterstanding will not simulate it.
  • 🔒 360° cameras don't zoom; you reframe after capture.
  • RAW support isn't listed in the cited specifications.

The manufacturer has not published ISO, shutter or aperture ranges, so Shutterstanding does not simulate manual exposure for this camera. 360 lessons cover reframing, horizon, stitching and spherical composition.

Matrice 30T
Wide · 1/2"
6.5×4.9 mm
Mavic 3 Classic
Hasselblad L2D-20c · 4/3
17.3×13.0 mm
X10
Wide · 1"
13.8×10.4 mm
X10
Narrow · 1/1.7"
7.5×5.6 mm
X10
Telephoto · 1/2"
6.4×4.8 mm
Skydio 2+
Main (Sony IMX577) · 1/2.3"
6.2×4.5 mm
Avata
FPV · 1/1.7"
6.4×4.8 mm
Inspire 1
Zenmuse X3 · 1/2.3"
6.2×4.5 mm

Strengths

  • Fly first, frame later: reframe any direction after capture
  • Stitching hides the drone in the final footage (per launch report)
  • Motion controller (Grip) + goggles with head tracking

Limitations to plan around

  • Sub-250 g only with the standard battery; the High-Capacity battery makes it 291 g.
  • Stitch lines can show on subjects close to the drone.
  • Each reframed view uses only part of the sphere, so the effective resolution of a flat reframe is far below 8K.

Sources